CX-2800 Series UV Crosslinker

The MORSTE crosslinker (CX-2800 Series) is a complete microprocessor controlled by a UV irradiation system, mainly dedicated to linking nucleic acid to membranes and eliminating PCR contamination. Its innovative design ensures its unique features

6 high-power 15 watt ultraviolet tubes with short irradiation time and high intensity

Aluminum alloy exposure chamber has good heat dissipation performance and minimal temperature change

Built in high-precision ultraviolet sensors to ensure the accuracy and reliability of experiments

Wide energy range, wide exposure time mode

Choose from three light sources: 254nm, 302nm, and 365nm

LCD display screen, displaying time or energy settings

The energy mode and exposure time can be preset or manually adjusted settings

9 sets of commonly used irradiation energy can be preset

UV safety door lock design to prevent accidental exposure to ultraviolet radiation

The safety door window can block ultraviolet radiation, and the sample can also be observed during operation

Programmable microprocessor controlled high UV output, capable of transmitting up to 10 J/cm2

Specifications

• Microprocessor control        

 • Precise Irradiation in either energy (Joules/cm²) or time (seconds)

• Preset programme for dosage of 0.120 J/cm² to optimised nucleic acid immobilisation

• nine preset programs for UV joules exposure    

 • nine preset programs for minutes of exposure

• Manual setting of UV joules or minutes of exposure             

• Storage of the last UV setting

• Tactile membrane keypad                                          

• Large L.E.D. readout

• Protective quartz disk on the UV sensor cell  

 • Spacious UV exposure chamber in stainless steel

• Safety interlock door with UV-blocking observation window

• Automatic restart with no loss of information if breaking-off of circuit       

 • Dual safety fuses

• UV wavelength interchangeability

All our CX-2800 Series come equipped with the following 

• Touch panel membrane keypad

 • Largely led readout

• No loss of information if the circuit interrupts

• Storage of the last UV setting (joules and minutes)

• Internal safety interlock

• UV blocking viewing window

• Large stainless steel internal UV exposure chamber

• Removable power cable

Climatic conditions

Alititude:2000 metes

Operating humidity:20% to80%(no condensation allowed)

Type of fuse:

. Type FST

. Time-lag T

. Ø 5 x 20

Characteristics and dimensions

Operating Instructions

· EXTERNAL DIMENSIONS 

CX-2800 height: 32cm depth: 35cm width: 55cm 

· INTERNAL CHAMBER DIMENSIONS 

CX-2800 height: 15cm depth: 35cm width: 36cm 

· WEIGHT 10 kg

· ULTRAVIOLET WAVELENGTH 254nm, 302nm or 365nm 

· ULTRAVIOLET SOURCE : 

CX-2800 6 x 15-watt tubes 

· POWER CX-2800: 90 W 

· MULTIPLE SET FUNCTIONS 

Nine preset UV Energy exposures 

Nine preset UV exposure minutes

manual setting of UV joules exposure 

Min.0.025 Joules / Max. 99.99 Joules 

manual setting of UV exposure minutes

Min.10 Seconds / Max.599 Minutes 

· JOULES DISPLAY

Two measurement ranges: 

from 0.025 to 9.999 Joules 

from 00.25 to 99.99 Joules 

· EXPOSURE TIME DISPLAY 

Two measurement ranges: 

from 00.10 to 99.59 Minutes/Seconds 

from 000.1 to 599.5 Minutes/Seconds

Warning / On the safety

a) This unit must be connected to a wall outlet having protective earth terminal. Connecting to the ground is obligatory protection.

b) Do not expose the unit to rain or moisture to prevent fire or shock hazards.

c) Unplug the unit from the wall outlet if you do not use it for a long minute. Disconnect the power cord by grasping the plug. Never pull the cord itself.

d) Never obstruct the air admission grids of the unit.

This symbol is a warning against possible UV radiation. Protect the eyes and skin from UV radiation.

Technical Data